Module Two Packet Tracer Activity Assignment Help

CYB 210 Module Two Packet Tracer Activity Guidelines and Rubric

Overview

The application of fundamental networking concepts provides the foundation for the increasingly complex task of designing a communication needs. In this activity, you will use Packet Tracer to perform the basic tasks of adding, connecting, and configu will need to modify an existing network by creating a new subnetwork and then add new systems to the reference network.

The image below is a logical diagram of the network for this activity.

The network topology details for this lab are located in the table below.

Device	Interface	IP Address	Subnet Mask	G
Marketing subnetwork	–	192.168.1.0	255.255.255.0
PC1_Marketing	FastEthernet0	192.168.1.101	255.255.255.0

PC2_Marketing FastEthernet0 192.168.1.102 255.255.255.0


PC3_Marketing	FastEthernet0	192.168.1.103	255.255.255.0
Printer1_Marketing
Router0_Gateway	FastEthernet0/0	192.168.1.1	255.255.255.0
Advertising subnetwork	–
PC1_Advertising	FastEthernet0
Router0_Gateway

Prompt

Submit a Microsoft Word document with screenshots of your completed topology and ping tests. Your topology should identi

Modify the Marketing subnetwork.
1. Add a new generic PC (labeled PC3_Marketing) and assign an IP address as indicated in the table above.
  1. Drag a PC from the End Devices group in the lower left pane of Packet Tracer into the Marketing Network.
  1. Update the label to PC3_Marketing.
  1. Configure PC3_Marketing with the proper IP configuration, including an IP address or subnet mask for FastE iv. Connect PC3_Marketing to the Marketing Switch by dragging a Copper Straight Through cable from the Co
1. Add a new printer (labeled Printer1_Marketing) and assign an IP address as indicated in the table above.
  1. Drag a printer from the End Devices group into the Marketing Network.
  1. Double-click to configure the label, IP address or subnet mask, and default gateway. iii. Connect the printer with a Copper Straight Through Cable to the Marketing Switch.
Create and populate the Advertising subnetwork.
1. Select a new and valid Ipv4 network address with a correct subnet mask for the Advertising subnetwork. Ind
  1. Select an IP address from the Advertising Network to assign to the Advertising Gateway interface for Route
  1. Typically, this is the first usable address on the network.
  1. Configure the Advertising Gateway address on Router0.
  1. Assign the IP address to FastEthernet 1/0 on Router0.
  1. Add a 2960 Switch from the Switches Group to the Advertising Network.
  1. Connect a Copper-Stright-Through cable from Router0 FastEthernet1/0 to any port on the Advertising swit
1. Add a new generic PC (labeled PC1_Advertising) to the Advertising subnetwork. The method of connection is u through the router (Router0_Gateway).
Test connections between devices in the Marketing and Advertising subnetworks. Submit three screenshots of ping te A. Screenshot showing the result of executing the ping command from PC1_Marketing to PC3_Marketing.
1. Screenshot showing the result of executing the ping command from PC2_Marketing to Printer1_Marketing.
1. Screenshot showing the result of executing the ping command from PC1_Advertising to PC1_Marketing.

What to Submit

Your submission should include two files. Your network modification will be in the form of a Microsoft Word document co results. Use a filename that includes the course code, the assignment title, and your name—for example, CYB_100_Project_On file using the same naming convention.

Module Two Packet Tracer Activity Rubr

Criteria	Proficient (100%)	Needs Improvement (70%)
Marketing Subnetwork: New Generic PC	Modifies the Marketing subnetwork by adding a new generic PC (labeled PC3_Marketing) and assigns an IP address as indicated in the table	Modifies the Marketing subnetwork by adding a new PC, but the connection is incorrect or not labeled
Marketing Subnetwork: New Printer	Modifies the Marketing subnetwork by adding a new printer (labeled Printer1_Marketing) and assigns an IP address as indicated in the table	Modifies the Marketing subnetwork by adding a new printer, but the connection is incorrect or not labeled
Advertising Subnetwork: Valid Network IP Address	Selects a new and valid Ipv4 network address with a correct subnet mask for the Advertising subnetwork and indicates this on the topology	Identifies an invalid network IP address and/or subnet mask, or omits either the network address or the subnet mask
Advertising Subnetwork: New Generic PC	Adds a new generic PC (labeled PC1_Advertising) to the Advertising subnetwork	Adds a new generic PC (labeled PC1_Advertising) to the Advertising subnetwork, but the connection is incorrect or not labeled
Ping Tests	Tests connections with ping tests, and three screenshots are submitted showing the proper connectivity for the network requirements	Tests connections with ping tests, but fewer than three screenshots are submitted, or results are not consistent with the network requirements